Views: 0 Author: Site Editor Publish Time: 2021-09-29 Origin: Site
Non-standard slitting machine is a large volume of paper, film, non-woven, aluminum foil, mica tape, and other thin materials into different widths of small volumes of pre-press, post-press equipment, commonly used in paper machinery and printing and packaging machinery.
Here is the content list:
l The characteristics of a non-standard slitting machine
l Application of non-standard slitting machine
l The difference between a traditional slitting machine and a modern slitting machine
l The use environment of non-standard slitting machine
The main feature of the slitting machine is the magnetic powder clutch as a resistance device, through the system control, to output a DC voltage to control the resistance generated by the magnetic powder clutch. The main advantage is that it is a passive device, which can control smaller tensions.
Non-woven non-standard slitting machine is mainly used for cutting or slitting wide rolls of non-woven fabrics, such as paper tube inner diameter of 75mm, non-woven outer diameter of 600mm and length of 1600mm or less, and slitting the rolls of base material non-woven fabrics into several rolls of actual required size, and the narrowest slitting can be up to 18mm wrapped edge strip.
The difference between a traditional slitting machine and a modern slitting machine
Previously, the magnetic powder clutch speed of the non-standard slitting machine can not be high, because it is easy to cause high-speed friction of the magnetic powder during operation, resulting in high temperature, shortening its life, and will seriously jam, so that the machine operation is blocked, bringing very serious consequences to the production, seriously affecting the production efficiency. Now the use of double frequency conversion motor control, so that the winding material diameter becomes larger through the frequency conversion motor control to make the magnetic powder friction in a certain value, and will not appear high temperature.
The modern slitter control scheme is to use a large motor to drive the winding and unwinding of the shaft, in the winding and unwinding of the shaft with a magnetic powder clutch, by adjusting the current of the magnetic powder clutch to control its resistance to control the surface tension of the material. Magnetic powder clutch and the brake is a special kind of automatic actuating element, which transmits torque through the magnetic powder filled in the working gap. Changing the magnetic current can change the magnetic state of the magnetic powder, and then adjust the transmitted torque. The non-standard machine can be used for stepless speed regulation from zero to synchronous speed and is suitable for high-speed section fine-tuning and speed regulation systems of small and medium power. It is also used for the unwinding or rewind tension control system that regulates the torque by adjusting the current to ensure that the tension remains constant during the winding process. Slitting machine continues to develop from single motor control to dual motor, triple motor, more stable and efficient in the case of faster machine speed.
The use environment of non-standard slitting machine
The non-standard slitting machine should be installed in a place with proper temperature, dryness, ventilation, good light, and convenient operation.
Kunshan Hexin Precise Machinery Co. Ltd has been working on non-standard slitting machines and Cutting Machine for many years. If you are interested in our cost-effective products, you can contact our company. Our website is https://www.hexinmachines.com/.
