Home » News » Products News » Precautions for jump knife cutting machine

Precautions for jump knife cutting machine

Views:0     Author:Site Editor     Publish Time: 2021-02-09      Origin:Site

Precautions for jump knife cutting machine

With the development of technology, more and more people choose jump knife cutting machine to cut a large number of thin roll materials. Because the cutting accuracy of the jump knife cutting machine is high, the processing speed is fast, and the output is high. Correct usage and daily maintenance can make your jump knife cutting machine play its best performance, and it can also make your jump knife cutting machine last longer. I believe this article can give you a lot.

 

  • How to make jump knife cutting machine cutting more precise

  • Regularly check and maintain jump knife cutting machine

  • Solutions to the problems of jump knife cutting machine

 

1. How to make jump knife cutting machine cutting more precise

The jump knife cutting machine processes the entire roll or the entire raw material, so you need to provide the entire roll of raw material. The most important performance index for slitting is slitting accuracy. The slitting length can be set continuously, and you can adjust the slitting length according to your needs. The magnetic powder clutch of the intermittent cutting machine can accurately adjust the tension.

 

If you find an error in the length of the material after slitting, you can calibrate it by setting parameters. Magnetic powder clutch is the resistance device of jump knife cutting machine, which can control smaller tension and improve product quality. The design of full magnetic powder control makes the tension adjustment of the kiss cutting machine with gap more convenient and accurate, and can effectively prevent the material of the unwinding group of the slitting machine from moving. In order to make the magnetic powder clutch of the jump knife cutting machine play its role better, we recommend that you keep the magnetic powder brake of the jump knife cutting machine on the horizontal axis and keep the environment dry. The jump knife cutting machine is best not to work in a humid environment. If you need to dissipate heat from the magnetic powder brake of the intermittent cutting machine, you can cool it naturally or install a fan for heat dissipation.

 

2. Regularly check and maintain jump knife cutting machine

 If you want the jump knife cutting machine to work better and have a longer service life, daily inspection and maintenance are essential. You need to clean the jump knife cutting machine in time to keep the kiss cutting machine with gap clean. Some parts of the jump knife cutting machine require lubricating oil maintenance.

 

Cleaning the jump knife cutting machine is a necessary task. You must clean the jump knife cutting machine in time to ensure that its surface is clean and free of dust and debris. You should check the jump knife cutting machine regularly. If you need to disassemble the jump knife cutting machine for inspection, do not use inappropriate tools, otherwise the machine may be damaged. The parts of the kiss cutting machine with gap usually need to be filled with lubricating oil, so as to keep them in good condition. The kiss cutting machine with gap has wearable parts, you need to pay attention to their wear and tear, and replace the parts with serious wear and tear in time. If the jump knife cutting machine is not used for a long time, you need to wipe the jump knife cutting machine clean, apply anti-rust oil, and finally cover the whole machine with a plastic sleeve.

 

3. Solutions to the problems of jump knife cutting machine

No matter how good the machine is, there may be problems. If there is a problem with your kiss cutting machine with gap, don't worry. Here are some ways to solve the problem, I hope to help you.

 

If the blade of the kiss cutting machine with gap has burrs, it means that the blade is dull and needs to be sharpened. It may also be because the slitter blade and the knife groove overlap too shallow. This kind of problem can also occur when the material is drawn into the slot of the slitter blade. At this time, you need to shut down the machine to clean it, and then restart it. The knife slot gap of the blade of the machine cannot be greater than 2.5mm, otherwise this problem will also occur. If you find that the blade creasing line is easy to break, there are two reasons, one is the quality of the raw material, and the other is the creasing line is too deep. If you find that the cutting edge of the jump knife cutting machine is not vertical, it may be because the angle of the blade holder of the machine is not correct and you need to adjust the angle. It may also be because the blade of the jump knife cutting machine is not in the center of the slot.

 

The above is all the content of this article, I hope this article can help you learn about jump knife cutting machine. We are an experienced manufacturer that can provide you with quality products, such as gap cutting machineautomatic slitting machine. If you need it, welcome to contact us.


QUICK LINKS

PRODUCTS

CONTACT US

Address: No.66, Kaigui Road, Yushan Town, Kunshan City, Jiangsu Province

Tel : +86 512 55196872 804

WhatsApp : +86 13511636155

Hand phone : +86 13511636155

Skype : live:peng765

QQ: 1692539610

E-mail: michaelpeng@kshxjx.cn

FOLLOW US

Copyright © 2020 Kunshan Hexin Precise Machinery Co. Ltd   

Support by Leadong.com