 |
| Size: | |
|---|---|
| Quantity: | |
HX-600JXS
Hexin
This machine employs programmable controller + man-machine touch screen + two servo controller to pull material, good synchronization, easy operation. This machine can do intermittent cutting and other six cutting methods: (1) Several intermittent kiss-cutting, +one through-cutting, (2) Several kiss-cutting + one through-cutting (3)kiss-cutting + rewinding (4)intermittent kiss-cutting +rewinding function , (5) Through-cutting (6) Intermittent through-cutting
◎Taiwan Brand Servo motor & Japan brand PLC applied
◎Touch screen with the ability to save parameters
◎Cutting length and cutting speed adjustable
◎Both Kiss-cut and full-cut are available, 6 different cutting models available for your choice.
◎Save raw materials for no waste discharging
◎Unwinding roll material diameter can be customized
specifications:
Model | HX-600JXS |
Voltage | 380V |
Total Power | 3.5KW |
N.W. | 620kg |
GW. | 650kg |
Cutting Length | 0.1-9999.9mm |
Cutting Width | 1-600mm |
Measurement | 2000*1400*1750mm |
Application:
Our machine is suitable for conductive fabric, foam, diffusion film, reflective film, double-sided tape, PET,
PC, PE insulation paper, copper / aluminum foil gap-type crop, so that the finished product retention gap,
no waste generated. Significant cost savings and labor, saving time and effort, which is a national initiative.
Characteristics for intermittent kiss cutting machine :
1. This machine adopts man-machine interface + PLC program device to set feeding material length, with lamination function.
2. Cutting and laminating can be finished at one time.
3. To save time and material, it is ergonomically designed which is easy to operate.
4. The cutting length is accurate.
5. Operation is easy.
6. Waste rate is low.
7. Manufacturing experience: 30 years
8. Export experience: 20 years
This machine employs programmable controller + man-machine touch screen + two servo controller to pull material, good synchronization, easy operation. This machine can do intermittent cutting and other six cutting methods: (1) Several intermittent kiss-cutting, +one through-cutting, (2) Several kiss-cutting + one through-cutting (3)kiss-cutting + rewinding (4)intermittent kiss-cutting +rewinding function , (5) Through-cutting (6) Intermittent through-cutting
◎Taiwan Brand Servo motor & Japan brand PLC applied
◎Touch screen with the ability to save parameters
◎Cutting length and cutting speed adjustable
◎Both Kiss-cut and full-cut are available, 6 different cutting models available for your choice.
◎Save raw materials for no waste discharging
◎Unwinding roll material diameter can be customized
specifications:
Model | HX-600JXS |
Voltage | 380V |
Total Power | 3.5KW |
N.W. | 620kg |
GW. | 650kg |
Cutting Length | 0.1-9999.9mm |
Cutting Width | 1-600mm |
Measurement | 2000*1400*1750mm |
Application:
Our machine is suitable for conductive fabric, foam, diffusion film, reflective film, double-sided tape, PET,
PC, PE insulation paper, copper / aluminum foil gap-type crop, so that the finished product retention gap,
no waste generated. Significant cost savings and labor, saving time and effort, which is a national initiative.
Characteristics for intermittent kiss cutting machine :
1. This machine adopts man-machine interface + PLC program device to set feeding material length, with lamination function.
2. Cutting and laminating can be finished at one time.
3. To save time and material, it is ergonomically designed which is easy to operate.
4. The cutting length is accurate.
5. Operation is easy.
6. Waste rate is low.
7. Manufacturing experience: 30 years
8. Export experience: 20 years
