 |
HX-350B
Hexin
◎Multi-function in ONE machine: Laminating / partial laminating+unwinding+laminating+die cutting +discharging sheet cutting/rewinding
◎Photo Cell if necessary
◎Sucking device during material feeding process
◎Waste discharge shaft
◎Sheet cutting station
◎Rewinding station
◎Safety curtain device
◎Optional function: Conveyor belt device for full-cut use
Model | 320B | 350B | 420B |
Cutting speed | 20-200 (t/m) | 20-200 (t/m) | 20-200 (t/m) |
Max unwinding diameter | 450mm | 450mm | 450mm |
Max web width | 320mm | 320mm | 420mm |
Max mould cutting area | 300x300mm | 320x380mm | 420x420mm |
Orientation accuracy | ±0.10mm | ±0.10mm | ±0.10mm |
Motor power | 3kw | 3kw | 4kw |
Power voltage | 380v±10% | 380v±10% | 380v±10% |
Machine weight | 2000kg | 2200kg | 2800kg |
Measurement | 2500x900x1400mm | 2600x950x1400mm | 2600x1050x1800mm |
HX-350B foil lid die cutting machine
allows the production of stamped parts and labels from any roll/reel material such as paper, film,
adhesive labels laminates and foams up to 10 mm height.
This robust machine consisting of a solid cast frame. The speed can be controlled electronically. Afterreaching a preset number of labels or running meters, the machine stops automatically.
1.Machine frame made of coated steel
2.Electronics integrated in the machine frame
3.unwinding with pneumatic compressed shaft for 3" cores
4.rewinding with pneumatic compressed shaft for 3" cores
5.Dancer-position-control
6.Manual lateral adjustment
7.Unwinding diameter max. 450 mm
8.Six separately winding and unwinding shaft’s over the machine
9.Color touch-display
10.Adjustable waste rewinder
11.Suitable for steel rule dies or wood dies
12.Four separate nip roller
13.In-feed control by servo motor
14.Nip roller with adjustable contact pressure of the rubber roller
Standard configurations:
1.Three laminating platform
2.One flatbed die cutter platform
3.One complete cutting platform
4.With three unwinding shaft,one rewinding shaft,two waste discharge shaft (The place of unwinding and waste discharge shaft can change).
5.With two security light curtains
6.One set of straight knife
1. Sticky production: Diversified electronic, electrical appliance, special mobile phone rubber
cushion, silicon rubber cushion, magic tape, electric conductive tape, powerful double side adhesive,
SUNEAST 3M, Sony special binding products
2. Dustproof materials: Cosmetic cotton, camera cotton, high density sponge, filtering sponge,
dust net and non-woven fabric
3. Shock absorbing products: EVA tape, rubber cushion, PORON cushion, 3M, inflammable
retardant EVA, high foam .
4. Insulation, EMI: Fireproof paper, aluminum foil, copper foil, PVC, PET, brown paper, sponge
sheath, pearl cotton sheath.
5.Heat insulation material: Silicon sheet, transparent mica, fiber cloth, heat insulation cotton (fabric).
1. Warranty for machine: 12months
2. After-service: A reply within 24 hours
3. A free training in our factory available before delivering machines
die cutting platform
Sheeting Platform
Control panel and touch screen of this foil lid die cutting machine
Suck device to avoid material moving
Security light curtains(the machine will automatic stop if hands close to flatbed die cutting station)
Working process
Unwinding-laminating-die cutting-waste discharge-sheeting or rolling
Here are some die cutting samples. our machine can die cut any shape you want,only by change the die cutting mould.
Wood flatbed die cutting mould pictures for reference
Trade Exhibition
1. Q: Are you a factory or trading company?
A: We are a factory and manufacturer
2. Q: Where is your factory located in ? How can I visit there?
A: Our factory is located in Kunshan which is very near from Shanghai, and our detailed
address is: Factory 9, No. 157, Wulian Road, Yushan Town,Kunshan, Suzhou, Jiangsu.
3. Q: what are your main products?
A: Our main products are belt cutting machines, slitting machines, sheeting machines,
laminating machines and rotary die cutting machines.
4. Q: Which industries can use your machines ?
A: All industries need to cut (include full cutting and kiss-cutting), slice, laminate, rotary die cut raw materials can use our machines.
5. Q: How to control the quality in your factory ?
A: Quality is priority. We control the quality of our products strictly, from the incoming
materials to the finished products. Our factory has obtained CE & ISO Certification
6. Q:If there are no machines available from your list, could we customize non-standard machines from you ?
A: Yes, we have our own professional design engineers, and can customize products
according to your requirement.
◎Multi-function in ONE machine: Laminating / partial laminating+unwinding+laminating+die cutting +discharging sheet cutting/rewinding
◎Photo Cell if necessary
◎Sucking device during material feeding process
◎Waste discharge shaft
◎Sheet cutting station
◎Rewinding station
◎Safety curtain device
◎Optional function: Conveyor belt device for full-cut use
Model | 320B | 350B | 420B |
Cutting speed | 20-200 (t/m) | 20-200 (t/m) | 20-200 (t/m) |
Max unwinding diameter | 450mm | 450mm | 450mm |
Max web width | 320mm | 320mm | 420mm |
Max mould cutting area | 300x300mm | 320x380mm | 420x420mm |
Orientation accuracy | ±0.10mm | ±0.10mm | ±0.10mm |
Motor power | 3kw | 3kw | 4kw |
Power voltage | 380v±10% | 380v±10% | 380v±10% |
Machine weight | 2000kg | 2200kg | 2800kg |
Measurement | 2500x900x1400mm | 2600x950x1400mm | 2600x1050x1800mm |
HX-350B foil lid die cutting machine
allows the production of stamped parts and labels from any roll/reel material such as paper, film,
adhesive labels laminates and foams up to 10 mm height.
This robust machine consisting of a solid cast frame. The speed can be controlled electronically. Afterreaching a preset number of labels or running meters, the machine stops automatically.
1.Machine frame made of coated steel
2.Electronics integrated in the machine frame
3.unwinding with pneumatic compressed shaft for 3" cores
4.rewinding with pneumatic compressed shaft for 3" cores
5.Dancer-position-control
6.Manual lateral adjustment
7.Unwinding diameter max. 450 mm
8.Six separately winding and unwinding shaft’s over the machine
9.Color touch-display
10.Adjustable waste rewinder
11.Suitable for steel rule dies or wood dies
12.Four separate nip roller
13.In-feed control by servo motor
14.Nip roller with adjustable contact pressure of the rubber roller
Standard configurations:
1.Three laminating platform
2.One flatbed die cutter platform
3.One complete cutting platform
4.With three unwinding shaft,one rewinding shaft,two waste discharge shaft (The place of unwinding and waste discharge shaft can change).
5.With two security light curtains
6.One set of straight knife
1. Sticky production: Diversified electronic, electrical appliance, special mobile phone rubber
cushion, silicon rubber cushion, magic tape, electric conductive tape, powerful double side adhesive,
SUNEAST 3M, Sony special binding products
2. Dustproof materials: Cosmetic cotton, camera cotton, high density sponge, filtering sponge,
dust net and non-woven fabric
3. Shock absorbing products: EVA tape, rubber cushion, PORON cushion, 3M, inflammable
retardant EVA, high foam .
4. Insulation, EMI: Fireproof paper, aluminum foil, copper foil, PVC, PET, brown paper, sponge
sheath, pearl cotton sheath.
5.Heat insulation material: Silicon sheet, transparent mica, fiber cloth, heat insulation cotton (fabric).
1. Warranty for machine: 12months
2. After-service: A reply within 24 hours
3. A free training in our factory available before delivering machines
die cutting platform
Sheeting Platform
Control panel and touch screen of this foil lid die cutting machine
Suck device to avoid material moving
Security light curtains(the machine will automatic stop if hands close to flatbed die cutting station)
Working process
Unwinding-laminating-die cutting-waste discharge-sheeting or rolling
Here are some die cutting samples. our machine can die cut any shape you want,only by change the die cutting mould.
Wood flatbed die cutting mould pictures for reference
Trade Exhibition
1. Q: Are you a factory or trading company?
A: We are a factory and manufacturer
2. Q: Where is your factory located in ? How can I visit there?
A: Our factory is located in Kunshan which is very near from Shanghai, and our detailed
address is: Factory 9, No. 157, Wulian Road, Yushan Town,Kunshan, Suzhou, Jiangsu.
3. Q: what are your main products?
A: Our main products are belt cutting machines, slitting machines, sheeting machines,
laminating machines and rotary die cutting machines.
4. Q: Which industries can use your machines ?
A: All industries need to cut (include full cutting and kiss-cutting), slice, laminate, rotary die cut raw materials can use our machines.
5. Q: How to control the quality in your factory ?
A: Quality is priority. We control the quality of our products strictly, from the incoming
materials to the finished products. Our factory has obtained CE & ISO Certification
6. Q:If there are no machines available from your list, could we customize non-standard machines from you ?
A: Yes, we have our own professional design engineers, and can customize products
according to your requirement.
