How to use roll to sheet cutting machine?

The roll to sheet cutting machine is ideal processing equipment widely used in paper making industry and paper products printing industry, which is widely used for cutting roll materials of cardboard, coated paper, kraft paper, whiteboard, gold and silver cardboard, laser paper, cigarette and wine packaging paper. So, do you know how to use it correctly? This article will take you to explore how to use the roll to sheet cutter.

 

The article can be divided into the following three parts：

l What are the technical requirements of the roll to sheet cutter?

l What are the precautions before starting the operation?

l What are the specific steps to operate the roll to sheet cutting machine?

 

What are the technical requirements of the roll to sheet cutter?

1. It is necessary to cut the whole roll or sheet of raw materials with a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc.

2. The important performance index of the fixed length slitting is the slitting accuracy, and the length consistency of the finished product is good.

3. The cutting length can be set continuously. If the actual cutting length has an error, it is easy to calibrate by setting parameters.

 

What are the precautions before starting the operation?

1. Before starting the machine, the operator must carry out a spot check on the machine according to the daily spot check/maintenance record of the equipment.

2. The special aircraft shall be operated by special personnel, and non-full-time personnel is not allowed to operate without approval.

3. Turn off the power switch of the roll to sheet cutter, check whether the electrical control switch works normally, whether the machine runs with abnormal noise, and the lubrication condition of the transmission parts.

4. After debugging the roll to sheet cutting machine, the operator should put the production tools in the designated position.

 

What are the specific steps to operate the roll to sheet cutting machine?

1. In the production process, non-operators can't touch any part of the machine, and the operator's body can't touch the running part of the machine.

2. In the production process, the operator must keep a certain distance from the front feeding wheel.

3. Any safety protection device installed on the machine can not be removed at will, and it should be reinforced and tightened regularly. If it is found loose, it should be installed immediately.

4. In the production process, in case of machine failure, the power supply shall be cut off immediately, and the maintenance personnel shall be informed for maintenance. The operator shall not repair without permission.

5. In the process of carrying cardboard, the forklift should be placed in a suitable position of the bracket to avoid the danger of tilting and collapse. When turning, the speed of pulling should be slow to avoid the danger of inertial collapse.

6. After finishing the work, turn off the power supply of the machine and do a good job in cleaning and maintenance of the roll to sheet cutting machine equipment.

 

Hexin Machinery not only provides high-quality products, but also provides you with the most intimate and considerate service. If you choose our products, we will wholeheartedly answer all your questions.