Double-layer Stickers Protective Films Gaskets Insulating Materials Anti Vibration Pads Foam Silicone Gasket Die Cutting Machine

◎Multi-function in ONE machine: Laminating / partial laminating+unwinding+laminating+die cutting +discharging sheet cutting/rewinding

◎Photo Cell if necessary                        

◎Sucking device during material feeding process

◎Waste discharge shaft                         

◎Sheet cutting station

◎Rewinding station                            

◎Safety curtain device

◎Optional function: Conveyor belt device for full-cut use

Model	320B	350B	420B
Cutting speed	20-200 (t/m)	20-200 (t/m)	20-200 (t/m)
Max unwinding diameter	450mm	450mm	450mm
Max web width	320mm	320mm	420mm
Max mould cutting area	300x300mm	320x380mm	420x420mm
Orientation accuracy	±0.10mm	±0.10mm	±0.10mm
Motor power	3kw	3kw	4kw
Power voltage	380v±10%	380v±10%	380v±10%
Machine weight	2000kg	2200kg	2800kg
Measurement	2500x900x1400mm	2600x950x1400mm	2600x1050x1800mm

 

 

 

HX-350B  foil lid die cutting machine

allows the production of stamped parts and labels from any roll/reel material such as paper, film, 

adhesive labels laminates and foams up to 10 mm height.
This robust machine consisting of a solid cast frame. The speed can be controlled electronically. Afterreaching a preset number of labels or running meters, the machine stops automatically.

 

1.Machine frame made of coated steel

2.Electronics integrated in the machine frame

3.unwinding with pneumatic compressed shaft for 3" cores

4.rewinding with pneumatic compressed shaft for 3" cores

5.Dancer-position-control

6.Manual lateral adjustment

7.Unwinding diameter max. 450 mm

8.Six separately winding and unwinding shaft’s over the machine

9.Color touch-display

10.Adjustable waste rewinder 

11.Suitable for steel rule dies or wood dies

12.Four separate nip roller

13.In-feed control by servo motor

14.Nip roller with adjustable contact pressure of the rubber roller

 

 Standard configurations: 

 

1.Three laminating platform

2.One flatbed die cutter platform

3.One complete cutting platform

4.With three unwinding shaft,one rewinding shaft,two waste discharge shaft  (The place of unwinding and waste discharge shaft can change).

5.With two security light curtains

6.One set of straight knife

 

1. Sticky production: Diversified electronic, electrical appliance, special mobile phone rubber 

cushion, silicon rubber cushion, magic tape, electric conductive tape, powerful double side adhesive, 

SUNEAST 3M, Sony special binding products

2. Dustproof materials: Cosmetic cotton, camera cotton, high density sponge, filtering sponge, 

dust net and non-woven fabric

3. Shock absorbing products: EVA tape, rubber cushion, PORON cushion, 3M, inflammable 

retardant EVA, high foam .

4. Insulation, EMI: Fireproof paper, aluminum foil, copper foil, PVC, PET, brown paper, sponge 

sheath, pearl cotton sheath.
5.Heat insulation material: Silicon sheet, transparent mica, fiber cloth, heat insulation cotton (fabric).

 

 

1. Warranty for machine: 12months
2. After-service: A reply within 24 hours
3. A free training in our factory available before delivering machines

 

 

 

die cutting platform

 

 

Sheeting Platform

 

 

Control panel and touch screen of this foil lid die cutting machine 

 

 

  Suck device to avoid material moving

 

 

 

Security light curtains(the machine will automatic stop if hands close to flatbed die cutting station)

 

 

Working process

 

Unwinding-laminating-die cutting-waste discharge-sheeting or rolling

 

 

 

 

 Here are some die cutting samples. our machine can die cut any shape you want,only by change the die cutting mould.

 

 

Wood flatbed die cutting mould pictures for reference

 

 

 

  Trade Exhibition

 

 

 

 

 

1. Q: Are you a factory or trading company?   

A: We are a factory and manufacturer

 

2. Q: Where is your factory located in ? How can I visit there?  

A: Our factory is located in Kunshan which is very near from Shanghai, and our detailed 

 address is: Factory 9, No. 157, Wulian Road, Yushan Town,Kunshan, Suzhou, Jiangsu.

 

3. Q: what are your main products?

A: Our main products are belt cutting machines, slitting machines, sheeting machines, 

laminating machines and rotary die cutting machines.

 

4. Q: Which industries can use your machines ?

A: All industries need to cut (include full cutting and kiss-cutting), slice, laminate, rotary die cut raw materials can use our machines.

 

 

5. Q: How to control the quality in your factory ?  

A: Quality is priority.  We control the quality of our products strictly, from the incoming 

materials to the finished products. Our factory has obtained CE & ISO Certification

 

 

6. Q:If there are no machines available from your list, could  we customize  non-standard machines from you ?

A: Yes, we have our own professional design engineers, and can customize products 

according to your requirement.

 

◎Glue-based products: 3C parts, foot pad, silicone, velcro backing, conductive tape, double-side tape,3M tape and all kinds of glue-based products.

◎Dustproof materials: cosmetic cotton, camera cotton, high density sponge, filtering sponge, dustproof filter, non-woven fabric, etc.

◎Shockproof materials: EVA tape, rubber cushion, PORON cushion,3M, flame-resistant  EVA, EPDM,etc.

◎Insulation/shielding materials : EMI Shielding material, fireproof paper, aluminum foil, copper foil, PVC,PET, k paper, sponge sheath, pearl cotton sheath and so on.

◎Heat-conductive/ heat-proof materials : silicon sheet, transparent mica, fiber cloth, heat insulation cotton and so on.

◎Other materials which are suitable for die cutting.

Model	HX-350B	HX-420B
Die Cutting speed	20-200次/分	20-200次/分
Max. unwinding diameter	450mm	450mm
Max. web width	350mm	420mm
Max. die cutting size	330x330mm	420x420mm
Precision	±0.10mm	±0.10mm
Power	3kw	4kw
Voltage	380v	380v
Machine weight	2200kg	2800kg
Machine size	2600x950x1400mm	2600x1050x1800mm